“tNd tobacco pipes” is not alive anymore!!

Dear fans of tNd tobacco pipes… To those that followed my hobby these last years… until 25th of Sep 2012, my work was known as “tNd tobacco pipes”. Unfortunately, due to personal problems in my life (divorce) I had to convert the name into “ND tobacco pipes”. Hope you will understand an be with me […]

September 27th, 2012 | Comments (0)

Storient Meerschaum Pipes

Yesterday i found this guy while searching on internet for some meer pipes… Seems like a great guy with some nice pipes overthere… 🙂

July 27th, 2012 | Comments (0)

Wallpaper for some of tNd pipes

These are wallpaper pictures made with P2811 freestyle Dublin pipe – Peter from Pfeifenmacher forum made them (very kind of him – thank you Peter)… several dimensions available so have fun 🙂 Also, i have started to add more wallpaper pictures of other tNd pipes – so, expect more in future… best regards

January 18th, 2012 | Comments (0)

Alternative Shape Award – November 2011

YEYY !!! … Yesterday one of my little babies got an Alternative Shape Award on Pfeifenmacher Forum from Germany.. Thank you guys from Pfeifenmacher. Original thread can be found here:

December 2nd, 2011 | Comments (0)

Pfeifenmacher forum awards for Shape and Decor

Pfeifenmacher forum awarded my P2211 pipe with the SHAPE and DECOR AWARD for August 2011. Thank You guys 🙂 The AWARDS thread can be found here:

September 11th, 2011 | Comments (0)

Decor Award – Juni 2011 – Pfeifenmacher forum

Today is a good day 🙂 … Pfeifenmacher forum awarded my P1811 – E.T. pipe pictures with the DECOR AWARD for June 2011. That is very nice of them and I thank them for that nice gesture. Guys, thank You all 🙂 The original thread can be found here:

July 1st, 2011 | Comments (0)

Rubber pipe bits…

I just found about rubber pipe bits… What a useful tool they are… A rubber tube like cover for the end of the stem, to prevent stem damage. The offer more comfortable and easier grip while smoking – in my opinion better than holding directly to  acrylic or vulcanite stems. What is more  important to […]

June 27th, 2011 | Comments (0)

A test of one of my pipes

A nice gentleman from France posted a review of one of my pipes – it is a pipe from “Pipe for Japan” initiative…. thank you Guillaume 🙂 Link here

May 30th, 2011 | Comments (0)

DIY Humidor

I got few cans of tobacco the other day and they were a bit dry so i got the idea to make a DIY humidor in order to make my tobacco a bit more wet – also to keep it from drying out… The box is from a shop with medical supplies – it is […]

May 7th, 2011 | Comments (0)

Making a handcut stems

Making a handcut stems Tools you will need: –         sandpaper (different grit’s from) –         files (different kind – bigger and needle files) –         drillbits (sizes 1.5mm, 3,5mm (standard length and a longer one (*) (150mm is usually enough), 4mm, 6.8 or 7.8mm (depending on the diameter of your tenon)) –         endmill or Forstner bit with […]

April 29th, 2011 | Comments (0)

« Newer Posts   |   Older Posts »